Before applying waterproofing paint, make sure the surface of the walls and roof have been cleaned. Cleaning is done to remove dust and old paint. For effective cleaning, you can use a scrubbed wall cleaner. Make sure all surfaces are free of both. If there is a wall surface that has large pores, fill it in. Use super cement to patch so that the new paint will be smoother than before one man and a brush. By doing this, the waterproof paint will be easier to apply. In the meantime, if you don’t have the time to paint your wall on your own, you may hire some of the trusted painters woodstock ga.
After all, surfaces have been cleaned, wait a while for them to dry. Do not apply the paint in a wet wall condition. This is to avoid the reduced adhesion of the paint. So make sure everything is clean and dry, then continue the next step.
After doing the cleaning, please double-check whether there are parts of the wall that is cracked, either cracked hair or other. If there is, please patch it first. You can use a bag to close the crack gap.
These cracks must also be ensured closed. This is so that when it rains there is no seepage. This method is done to help waterproofing paint carry out their duties. One of the causes of rain seeping into the wall is the presence of cracks in the wall. If not patched, of course, any kind of paint will not be able to overcome the water seepage.
If you have cleaned the surface of the wall and checked the cracks, you can start doing the painting process. For painting, you can use a brush, roll, or spray. Please choose which way you think is easier. After that, apply the paint to the entire wall to be coated with waterproof paint.
Usually, for this painting, it takes around 1kg / square meter, with the coating process carried out twice. When painting, make sure that the entire surface is covered with paint evenly. So that the layers are more evenly distributed, while painting, apply the same pressure. It’s just that, on the wall that is not flat can be on